6" Oval Red LED Stop/Turn/Tail Light – 10 Diodes, Grommet Mount, Standard Plug

10 Red LEDs. Three Lighting Functions. One Oval Fixture.

Equip compatible commercial trucks, trailers, recreational vehicles, and specialty vehicles with Kaper II's 6-Inch Oval Red LED Stop/Turn/Tail Light.

Designed for rear vehicle signaling applications, this fixture combines stop, turn, and tail lighting functions in a single oval lamp.

Featuring 10 red LED diodes, a grommet-mount configuration, and a standard plug connection, this light provides an option for qualifying OEM installations and replacement lighting projects.

Its triple-function design allows compatible vehicle lighting systems to incorporate three essential signaling functions into one lamp assembly.

Key Features & Benefits

• Triple-Function Lighting: Combines stop, turn, and tail lighting functions in one fixture.

• 10 LED Diodes: Features a defined 10-diode LED configuration.

• Red Illumination: Produces red light for rear vehicle signaling applications.

• 6-Inch Oval Design: Provides a familiar nominal lamp format for compatible vehicle lighting assemblies.

• LED Technology: Uses solid-state lighting rather than traditional incandescent filaments.

• Grommet-Mount Configuration: Designed for installation with a compatible mounting grommet.

• Standard Plug Connection: Features a standard-style electrical connector interface.

• Rear Vehicle Lighting: Intended for stop, turn signal, and tail lamp applications.

• OEM Lighting Option: Can be evaluated for compatible truck, trailer, RV, and specialty vehicle manufacturing.

• Replacement Lighting: May be suitable when replacing an existing oval stop/turn/tail lamp with matching specifications.

Product Specifications

Triple-Function Stop, Turn & Tail Lighting

This fixture is designed to perform three important rear vehicle lighting functions.

Stop / Brake Light

The stop light function signals vehicle braking when connected to the appropriate brake-light circuit.

Turn Signal

The turn signal function communicates the driver's intended turning direction through a flashing signal when connected to a compatible vehicle signaling system.

Tail / Running Light

The tail light function provides rear vehicle position lighting when the appropriate exterior lighting circuit is activated.

Combining these functions into one fixture can simplify component selection for compatible rear vehicle lighting assemblies.

The supplied description confirms the three intended functions but does not establish the exact electrical circuit arrangement or relative output levels between functions.

10-Diode LED Configuration

One of this lamp's defining specifications is its 10-diode LED arrangement.

The diode count provides a useful identifier for product selection and replacement-part searches.

LEDs use solid-state electronic components rather than heated incandescent filaments.

However, the number of LEDs does not establish total lumen output, visibility distance, electrical consumption, or regulatory compliance.

A 10-diode lamp may use different LED components, optics, or electrical circuitry than a 60-diode lamp.

Consequently, diode count alone should not be used to rank the brightness of these models.

Red LED Illumination

Red is the specified illumination color for this fixture.

Red lighting is commonly used for rear stop, turn, and tail lighting functions on vehicles.

The supplied product title confirms red illumination but does not establish whether the physical lens is red or clear.

Lens color and emitted light color are separate product attributes and should be verified independently.

For on-road applications, confirm the lamp's applicable regulatory markings and installation requirements.

6-Inch Oval Configuration

The nominal 6-inch oval format is commonly encountered in commercial vehicle lighting assemblies.

This configuration can be considered for compatible rear lighting locations on trucks, trailers, RVs, and specialty vehicles.

However, the nominal size does not establish exact outside dimensions or mounting-hole requirements.

Before installation, verify the fixture's overall dimensions, required grommet, and rear clearance.

Grommet-Mount Design

This lamp is described as a grommet-mount fixture.

Grommet mounting typically uses a compatible retaining ring or insert to secure a lamp within a prepared vehicle panel opening.

This configuration is commonly used in commercial vehicle lighting assemblies.

The supplied description does not confirm whether a mounting grommet is included.

It also does not identify the required mounting-hole dimensions or compatible panel thickness.

Standard Plug Connection

The standard plug connection is an important distinguishing feature of this model.

Unlike the previously cataloged 60-diode hardwired stop/turn/tail lamp, this fixture is identified with a standard-style electrical plug interface.

For OEM manufacturers and maintenance technicians, connector compatibility is an important consideration when selecting lighting components.

The supplied description does not identify the exact connector standard, number of terminals, wiring polarity, or whether a matching pigtail is included.

A standard plug designation should not be interpreted as universal compatibility with every vehicle wiring harness.

Potential Applications

Commercial Truck Rear Lighting

A potential OEM or replacement stop/turn/tail lighting option for compatible commercial trucks.

Cargo and Utility Trailers

May be suitable for qualifying trailer rear lighting assemblies.

RV and Motorhome Lighting

Can be evaluated for compatible recreational vehicle rear signaling applications.

Box Trucks and Work Vehicles

An option for compatible rear lighting assemblies on work trucks and specialty vehicles.

Fleet Maintenance

May be considered when replacing an existing oval stop/turn/tail lamp with matching mounting and connector specifications.

OEM Vehicle Manufacturing

The 6-inch oval configuration, 10-diode LED arrangement, red illumination, grommet mounting, and standard plug connection provide useful specifications for manufacturers selecting vehicle lighting components.

These are potential applications rather than confirmed vehicle fitment or regulatory-compliance claims.

Installation Considerations

Before installation, confirm:

• Actual lamp length, width, and depth.

• Required mounting-hole dimensions.

• Compatible grommet size and type.

• Whether the mounting grommet is included.

• Operating voltage and electrical requirements.

• Standard plug type and terminal configuration.

• Whether a matching plug or pigtail is included.

• Stop, turn, and tail circuit assignments.

• Correct electrical polarity.

• Compatibility with the vehicle's turn signal system.

• Whether additional electrical components are required.

• Applicable DOT, FMVSS, and SAE requirements.

• Compatibility with the intended mounting location.

Follow Kaper II's installation instructions and applicable vehicle lighting requirements.

Important: The supplied description confirms a 6-inch oval LED stop/turn/tail lamp with 10 red diodes, grommet mounting, and a standard plug connection. Voltage, lens color, connector details, mounting dimensions, included accessories, and regulatory certification require verification.