6" Oval LED Stop/Turn/Tail & Reverse Light – 13 Red / 4 White Diodes, Grommet Mount

Four Lighting Functions. Two LED Colors. One Oval Fixture.

Simplify rear vehicle lighting component selection with Kaper II's 6-Inch Oval LED Stop/Turn/Tail & Reverse Light.

This combination LED lamp incorporates four essential lighting functions into a single 6-inch oval fixture: stop, turn, tail, and reverse.

Featuring 13 red LED diodes and 4 white LED diodes, the lamp combines rear vehicle signaling with backup illumination in one assembly.

Its grommet-mount configuration makes it an option for compatible OEM vehicle production, trailer manufacturing, fleet maintenance, and replacement lighting applications.

Key Features & Benefits

• Four Lighting Functions: Combines stop, turn, tail, and reverse lighting in one fixture.

• 17 Total LED Diodes: Features 13 red LEDs and 4 white LEDs.

• Red and White Illumination: Provides the specified colors for rear signaling and backup lighting.

• 6-Inch Oval Design: Offers a familiar nominal vehicle lighting format.

• Combination Lighting Configuration: Integrates multiple rear lighting functions into one lamp assembly.

• LED Technology: Uses solid-state lighting rather than incandescent filaments.

• Grommet-Mount Design: Intended for installation using a compatible mounting grommet.

• OEM Lighting Applications: Can be evaluated for compatible commercial truck, trailer, RV, and specialty vehicle manufacturing.

• Replacement Lighting Option: May be suitable where an existing multifunction lamp has matching mounting and electrical specifications.

Product Specifications

Four-Function Rear Vehicle Lighting

This fixture is designed to perform four vehicle lighting functions.

Stop / Brake Light

The stop light function communicates vehicle braking through red illumination when connected to the appropriate brake-light circuit.

Turn Signal

The turn signal function communicates the driver's intended turning direction through a flashing signal when connected to a compatible signaling system.

Tail / Running Light

The tail light function provides red rear position lighting when the vehicle's applicable exterior lighting circuit is activated.

Reverse / Backup Light

The reverse function provides white illumination for the area behind the vehicle when connected to the appropriate reverse-light circuit.

Integrating these functions into one fixture can reduce the number of separate lamp assemblies needed in a compatible vehicle design.

However, the supplied description does not establish the lamp's exact wiring arrangement, individual function outputs, or whether additional electrical components are required.

13 Red LEDs and 4 White LEDs

The combination diode configuration is the defining feature of this model.

13 Red LED Diodes

The red LED section supports the specified stop, turn, and tail lighting functions.

4 White LED Diodes

The white LED section supports the specified reverse-lighting function.

Together, the two groups provide 17 LED diodes in one fixture.

This configuration is particularly relevant to buyers seeking a combination rear lighting component rather than separate stop/turn/tail and backup lamps.

LED count alone does not establish lumen output, visibility distance, beam coverage, or regulatory compliance.

Combination Red and White Illumination

This lamp produces both red and white illumination.

Red is used for the specified rear stop, turn, and tail functions, while white is used for backup illumination.

The supplied description confirms the emitted colors but does not identify the physical lens configuration.

The lens could use different optical sections or materials, but those details should not be assumed without product documentation.

For on-road installations, verify applicable lighting requirements, including lamp positioning, visibility, and certification.

6-Inch Oval Design

The nominal 6-inch oval format is commonly used in commercial vehicle lighting assemblies.

This configuration may be suitable for compatible rear lighting installations on trucks, trailers, RVs, and specialty vehicles.

Combining multiple functions within one nominal fixture format can be useful when designing or replacing rear lighting assemblies.

However, nominal size does not establish exact outside dimensions or mounting-hole requirements.

Grommet-Mount Configuration

This model is designed for grommet mounting.

A compatible mounting grommet typically retains the lamp within a prepared vehicle panel opening.

This style is commonly encountered in commercial vehicle and trailer lighting assemblies.

The supplied product description does not confirm whether the mounting grommet is included.

It also does not establish the required opening dimensions, panel thickness, or fixture depth.

Electrical Integration

Because this fixture performs four lighting functions, proper electrical integration is particularly important.

The vehicle wiring system must support the required stop, turn, tail, and reverse-light circuits.

The supplied title does not identify whether the lamp uses a standard plug, hardwired leads, or another connection arrangement.

It also does not specify wire count, wire colors, connector pinout, polarity, or operating voltage.

These details must be confirmed before installation or OEM integration.

Potential Applications

Cargo and Utility Trailers

A potential combination rear lighting option for compatible trailer designs requiring stop, turn, tail, and reverse functions.

Commercial Trucks

May be suitable for qualifying commercial truck rear lighting assemblies.

RV and Motorhome Lighting

Can be evaluated for compatible recreational vehicle rear lighting installations.

Work Trucks and Specialty Vehicles

An option for vehicle builders seeking a combination rear lighting fixture.

OEM Vehicle Manufacturing

The multifunction design can be considered when evaluating rear lighting layouts and component requirements.

Fleet Maintenance

May be suitable when replacing an existing combination lamp with matching electrical and mounting specifications.

These are potential applications rather than confirmed vehicle fitment or regulatory approvals.

Installation Considerations

Before installation, confirm:

• Actual lamp length, width, and depth.

• Required mounting-hole dimensions.

• Compatible grommet size and type.

• Whether the mounting grommet is included.

• Operating voltage and current requirements.

• Electrical connection type.

• Wire count, colors, gauge, and length.

• Stop, turn, tail, and reverse circuit assignments.

• Correct wiring polarity.

• Compatibility with the vehicle's turn signal system.

• Required lamp positioning and visibility.

• Applicable DOT, FMVSS, and SAE requirements.

• Whether the installation requires additional lighting components.

Follow Kaper II's installation instructions and applicable vehicle lighting requirements.

Important: The supplied description confirms a 6-inch oval combination LED stop/turn/tail and reverse lamp featuring 13 red LEDs, 4 white LEDs, and grommet mounting. Voltage, connection type, wiring, mounting dimensions, included accessories, and regulatory certification require verification.