19.5" × 6" Ford Super Duty Front Wheel Simulator Set – 8-Lug, M14 × 1.5
Ford Super Duty Styling. Heavy-Duty Appearance. Front Wheel Compatibility.
Give your Ford Super Duty truck a clean, professional appearance with Kaper II's 19.5" × 6" Front Wheel Simulator Set.
Designed for compatible Ford Super Duty front wheel assemblies, this simulator set features an eight-lug configuration, five-hand-hole design, M14 × 1.5 wheel stud specification, and pop-off caps.
The 19.5-inch wheel diameter and 6-inch wheel width make this model suitable for consideration on qualifying commercial-duty Ford Super Duty chassis equipped with matching front wheel assemblies.
Its five-hand-hole design provides a distinctive commercial truck appearance, while the M14 × 1.5 wheel stud specification identifies an important compatibility requirement.
The pop-off cap configuration adds a removable component to the simulator design, distinguishing this model from products featuring fixed or permanently integrated caps.
Whether maintaining a commercial fleet, upgrading a work truck, or refreshing a compatible specialty vehicle, Kaper II wheel simulators offer a practical way to improve the appearance of existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
19.5" Wheel Diameter: Designed for qualifying heavy-duty wheel assemblies.
6" Wheel Width: Matches the specified wheel width configuration.
Ford Super Duty Application: Intended for compatible Ford Super Duty truck wheels.
Front Wheel Design: Specifically designated for front axle wheel simulator installations.
8-Lug Configuration: Intended for compatible eight-lug wheel assemblies.
5-Hand-Hole Design: Features five openings for a distinctive commercial truck appearance.
M14 × 1.5 Wheel Stud Compatibility: Identifies the required nominal stud diameter and thread pitch.
Pop-Off Caps: Features a removable cap configuration.
Existing Wheel Upgrade: Enhances wheel appearance without replacing the original wheels.
Commercial Fleet Styling: Provides an appearance upgrade for qualifying commercial-duty Ford trucks.
Product Specifications
| Specification | Details |
|---|
| Product Type | Front Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 19.5" |
| Wheel Width | 6" |
| Vehicle Application | Ford Super Duty |
| Wheel Position | Front |
| Axle Application | Front Axle |
| Lug Configuration | 8-Lug |
| Hand-Hole Configuration | 5 Hand Holes |
| Wheel Stud Specification | M14 × 1.5 |
| Nominal Stud Diameter | 14mm |
| Thread Pitch | 1.5mm |
| Center Cap Configuration | Pop-Off Caps |
| Bolt Circle Diameter | Not specified |
| Lug Nut Hex Size | Not specified |
| Material | Not specified |
| Finish | Not specified |
| Mounting / Retention Method | Not specified |
| Exact Ford Model / Model Years | Not confirmed |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Ford Super Duty Commercial Trucks
Designed for consideration on qualifying Ford Super Duty trucks equipped with compatible 19.5" × 6" eight-lug front wheel assemblies and M14 × 1.5 wheel studs.
Ford Super Duty Fleet Vehicles
An appearance upgrade for compatible commercial fleet trucks requiring the specified front wheel configuration.
Ford Super Duty Work Trucks
May be suitable for qualifying service trucks, utility vehicles, and other commercial-duty Ford Super Duty applications.
Ford-Based Specialty Vehicles
May be suitable for qualifying specialty vehicle builds using compatible Ford Super Duty chassis and matching front wheel assemblies.
Exact Ford model, production year, chassis, bolt circle, wheel profile, and mounting compatibility must be verified before purchase.
Ford Super Duty Front Wheel Compatibility
This simulator set is specifically identified for Ford Super Duty front wheel applications.
Front and rear wheel assemblies can differ in profile, offset, hub clearance, and mounting requirements.
Customers should confirm that the simulator is compatible with their vehicle's original front wheel configuration.
19.5" × 6" Wheel Design
The 19.5-inch diameter and 6-inch width are essential fitment specifications.
Commercial-duty wheels may vary in profile, offset, center opening, and mounting arrangement even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a front wheel simulator.
Eight-Lug Wheel Configuration
This wheel simulator set is identified for compatible eight-lug front wheel assemblies.
However, lug count alone does not establish compatibility.
Eight-lug wheels can use different bolt-circle diameters, wheel profiles, and mounting arrangements.
Customers should verify the complete wheel configuration before installation.
Distinctive Five-Hand-Hole Design
The five-hand-hole configuration provides a recognizable commercial truck wheel appearance.
This design distinguishes the simulator from wheel covers featuring four, eight, or other hand-hole configurations.
Hand-hole count should be included in website specifications and product filters to help customers identify the correct simulator.
M14 × 1.5 Wheel Stud Compatibility
The M14 × 1.5 wheel stud specification is an important fitment requirement.
M14 identifies a nominal stud diameter of 14 millimeters, while 1.5 identifies the thread pitch in millimeters.
This measurement should not be confused with lug nut hex size, bolt-circle diameter, or wheel diameter.
M14 × 1.5 and M14 × 2.0 wheel stud threads are not interchangeable.
Customers should verify that their original wheel assembly uses the specified stud thread dimensions and that the simulator's mounting system is compatible.
The supplied designation does not establish the exact retention hardware or mounting method.
Pop-Off Cap Design
The pop-off cap configuration provides removable cap components within the wheel simulator assembly.
This design distinguishes the product from wheel simulators featuring fixed or permanently integrated caps.
Customers should follow the manufacturer's instructions when removing or reinstalling the caps to avoid damaging the simulator or retention components.
The supplied designation does not confirm the cap diameter, number of caps, or whether removal provides access to specific wheel service components.
Commercial Fleet & Work Truck Styling
Front wheel simulators provide a practical way to refresh the appearance of existing commercial-duty Ford wheels without replacing the original assemblies.
A coordinated wheel appearance can complement vehicle branding, fleet maintenance, and commercial transportation applications.
Installation Recommendations
Before installation, verify the front wheel diameter, 6-inch wheel width, eight-lug configuration, five-hand-hole design, M14 × 1.5 wheel studs, bolt-circle diameter, wheel profile, hub clearance, valve-stem access, and mounting requirements.
Confirm that the simulator is intended for the vehicle's front axle and that the pop-off caps provide the required clearances.
Follow Kaper II's installation instructions and applicable wheel safety requirements.
Do not substitute incompatible threaded hardware or modify safety-critical wheel components to accommodate the simulator.
Important: The supplied designation does not establish the exact Ford model or year range, bolt-circle diameter, lug nut hex size, material, finish, mounting method, cap dimensions, or package contents. These details should be verified before publication.
