16" × 6" Universal Front/Tag Wheel Simulator Set – 10-Lug, 360° Retention
Universal Wheel Styling. Ten-Lug Compatibility. 360° Retention.
Give your compatible commercial truck or specialty vehicle a clean, professional appearance with Kaper II's 16" × 6" Universal Front/Tag Wheel Simulator Set.
Designed for qualifying front/tag wheel applications, this simulator set features a 10-lug configuration, 7.25-inch bolt circle, and 360° retention system.
The 16-inch wheel diameter and 6-inch wheel width provide important dimensional specifications for identifying compatible wheel assemblies.
Its ten-lug configuration distinguishes this model from eight-lug universal wheel simulators, while the 360° retention designation identifies an important installation characteristic.
Whether maintaining a commercial fleet, refreshing an older work truck, or upgrading a compatible specialty vehicle, Kaper II wheel simulators provide a practical way to improve the appearance of existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
16" Wheel Diameter: Designed for compatible 16-inch wheel assemblies.
6" Wheel Width: Matches the specified wheel width configuration.
Universal Application: Intended for qualifying wheel assemblies meeting the required specifications.
10-Lug Configuration: Identifies the specified ten-lug wheel pattern.
7.25" Bolt Circle: Provides an essential wheel fitment measurement.
360° Retention System: Features a circumferential retention configuration.
Front/Tag Designation: Identified for the specified front/tag wheel application.
Existing Wheel Upgrade: Enhances wheel appearance without replacing the original wheels.
Commercial Vehicle Styling: Complements compatible work trucks and fleet vehicles.
Professional Appearance: Provides a coordinated look for qualifying wheel assemblies.
Product Specifications
| Specification | Details |
|---|
| Product Type | Front/Tag Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 16" |
| Wheel Width | 6" |
| Application | Universal |
| Wheel Position | Front/Tag designation |
| Lug Configuration | 10-Lug |
| Bolt Circle Diameter | 7.25" |
| Metric Bolt Circle Equivalent | 184.15mm |
| Bolt Pattern | 10 × 7.25" |
| Retention Configuration | 360° Retention |
| Hand-Hole Configuration | Not specified |
| Wheel Stud Thread Size | Not specified |
| Lug Nut Hex Size | Not specified |
| Material | Not specified |
| Finish | Not specified |
| Center Cap Configuration | Not specified |
| Exact Retention Hardware | Not specified |
| Exact Vehicle Makes / Models | Not confirmed |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Universal Front Wheel Applications
Designed for consideration on compatible 16" × 6" front wheel assemblies featuring a ten-lug configuration and 7.25-inch bolt circle.
Front/Tag Wheel Configurations
The supplied designation identifies this product as Front Tag. Exact applicability to tag-axle wheel positions should be verified against the manufacturer fitment information.
Commercial Work Trucks
May be suitable for qualifying commercial-duty vehicles equipped with matching wheel assemblies.
Specialty Commercial Vehicles
May be suitable for compatible utility trucks, service vehicles, and specialty commercial chassis.
RV and Motorhome Chassis
May be suitable for qualifying RV or motorhome chassis using matching wheel dimensions and mounting requirements. Vehicle-specific fitment must be confirmed.
The universal designation does not establish compatibility with every vehicle using a ten-lug wheel.
16" × 6" Wheel Compatibility
The 16-inch diameter and 6-inch width are essential fitment specifications.
Commercial wheel assemblies can vary in offset, profile, center opening, and mounting requirements even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a wheel simulator.
Ten-Lug, 7.25-Inch Bolt Circle
This wheel simulator set is identified for ten-lug wheel assemblies featuring a 7.25-inch bolt circle.
The bolt circle is the diameter of the circle passing through the centers of the wheel's ten mounting positions.
A 7.25-inch bolt circle is equivalent to 184.15 millimeters.
This configuration may be expressed as 10 × 7.25".
Customers should verify the original wheel's bolt pattern before ordering, as not all ten-lug wheels use the same bolt-circle diameter.
360° Retention System
This model is identified with a 360° retention configuration.
The designation indicates a circumferential retention design, distinguishing this simulator from products identified with other mounting arrangements.
The exact retention components and engagement method have not been supplied.
Customers should verify that their original wheel profile is compatible with the retention system and follow the manufacturer's installation instructions.
Front/Tag Wheel Application
This simulator set carries a Front Tag application designation.
Front wheel assemblies may differ from rear wheel assemblies in profile, offset, hub clearance, and mounting requirements.
Although the product name includes Tag, the supplied description does not establish whether it is intended for all tag-axle configurations or a specific wheel arrangement.
Customers should verify the approved wheel position before installation.
Universal Wheel Application
This product carries a universal application designation.
Universal fitment is based on matching the required wheel specifications rather than assuming compatibility with every vehicle manufacturer or model.
Customers should confirm wheel diameter, width, lug count, bolt circle, wheel profile, axle position, and retention requirements before ordering.
Commercial Fleet & Specialty Vehicle Styling
Wheel simulators provide a practical way to refresh the appearance of existing commercial-duty wheels without replacing the original assemblies.
A coordinated wheel appearance can complement vehicle maintenance, fleet branding, and specialty vehicle applications.
Installation Recommendations
Before installation, verify the 16-inch wheel diameter, 6-inch wheel width, ten-lug configuration, 7.25-inch bolt circle, wheel profile, hub clearance, valve-stem access, and 360° retention compatibility.
Confirm the exact vehicle model and approved front/tag wheel application.
Use only mounting and retention components approved for the specific simulator.
Follow Kaper II's installation instructions and applicable wheel safety requirements.
Do not modify safety-critical wheel components to accommodate the simulator.
Important: The supplied designation does not establish material, finish, hand-hole count, center cap configuration, detailed retention hardware, exact vehicle makes or models, or package contents. These details should be verified before publication.
