Restore the clean, finished appearance of compatible Ford E-Series wheels with this 16" x 6" Front Wheel Simulator Set.
Designed for compatible 2008–current Ford E-350 and E-450 applications, this front wheel simulator configuration fits specified 16-inch x 6-inch, 8-lug wheels with an 8-on-6.5-inch bolt pattern.
The distinctive 4-hand-hole design is an important fitment and visual characteristic, particularly for customers replacing an existing simulator on a Ford E-Series cutaway, Class C motorhome, shuttle, or commercial vehicle.
2008–Current Ford E-350 / E-450 Applications
This wheel simulator set is intended for compatible 2008–current Ford E-350 and E-450 wheel applications meeting the specified wheel requirements.
These Ford platforms are commonly found beneath a wide variety of completed vehicles, including:
- Class C motorhomes
- RVs
- Cutaway chassis vehicles
- Shuttle buses
- Commercial vehicles
- Delivery vehicles
- Specialty vehicles
- Fleet vehicles
Because completed vehicles may use different wheel configurations, customers should verify the actual wheel rather than relying exclusively on the RV or body manufacturer's model information.
16" x 6" Wheel Size
This simulator is designed for compatible 16-inch diameter x 6-inch wide wheels.
Both dimensions are important for correct fitment:
16-inch diameter + 6-inch width
Customers should verify actual wheel dimensions before ordering rather than selecting a simulator based solely on tire size.
8-Lug / 8-on-6.5" Configuration
The simulator is designed for compatible 8-lug wheels with an 8-on-6.5-inch bolt pattern.
This bolt pattern may also be described as:
- 8 on 6.5
- 8 x 6.5
- 8 lug 6.5
- 8 lug 6-1/2
- 8-lug Ford wheel
Including these variations helps customers locate the correct replacement even when they use different bolt-pattern terminology.
4-Hand-Hole Design
The 4-hand-hole wheel configuration is one of the most important identifying characteristics of this application.
Customers replacing an existing simulator should compare the underlying wheel and existing simulator carefully to confirm the correct hand-hole configuration.
Key visual and fitment characteristics include:
- 4 hand holes
- 16-inch wheel diameter
- 6-inch wheel width
- 8-lug configuration
- 8-on-6.5-inch bolt pattern
- Front wheel position
Front Wheel Application
This set is specifically designed for the front wheel position.
Front and rear wheel simulators can differ significantly in depth and profile due to the wheel and hub configuration. Customers should not assume that a front simulator can be substituted for a rear simulator.
Ford E-Series RV & Motorhome Applications
This simulator has particularly strong relevance in the RV aftermarket because Ford E-350 and E-450 chassis are commonly associated with Class C motorhomes and other specialty vehicle conversions.
A customer may know the RV manufacturer and model but not the chassis-wheel specification. For replacement purposes, identifying the underlying Ford E-350 or E-450 chassis can be an important step toward locating the correct wheel simulator.
Specifications
| Specification |
Details |
| Product Type |
Front Wheel Simulator Set |
| Wheel Position |
Front |
| Wheel Diameter |
16 Inch |
| Wheel Width |
6 Inch |
| Wheel Size |
16" x 6" |
| Lug Configuration |
8 Lug |
| Bolt Pattern |
8 on 6.5 Inch |
| Hand-Hole Configuration |
4 Hand Holes |
| Vehicle Make |
Ford |
| Vehicle Models |
E-350 / E-450 |
| Application Years |
2008–Current |
| Primary Function |
Wheel Appearance / Wheel Simulation |
Features
- 16" x 6" front wheel simulator set
- Designed for compatible Ford E-350 / E-450
- 2008–current application range
- 8-lug wheel configuration
- 8-on-6.5-inch bolt pattern
- 4-hand-hole design
- Specifically configured for front wheels
- Provides a clean, finished wheel appearance
- Useful for replacing damaged or missing wheel simulators
- Strong replacement application for compatible Class C RV chassis
- Suitable for commercial and specialty vehicles
- Ideal for restoration and appearance upgrades
Applications & Compatibility
Designed for compatible 2008–current Ford E-350 and E-450 applications equipped with the specified wheel configuration.
Potential applications include:
- Class C motorhomes
- Class C RVs
- Ford E-350 cutaway chassis
- Ford E-450 cutaway chassis
- Shuttle buses
- Commercial vehicles
- Work vehicles
- Fleet vehicles
- Specialty vehicles
- Vehicle conversions
Important Fitment Note
Before ordering, verify all of the following:
- Ford E-350 or E-450 chassis
- 2008–current applicable model year
- 16-inch wheel diameter
- 6-inch wheel width
- Front wheel position
- 8-lug configuration
- 8-on-6.5-inch bolt pattern
- 4-hand-hole wheel configuration
- Wheel profile and construction
- Hub and center clearance
- Lug-nut configuration
- Simulator mounting compatibility
Vehicle year and model alone do not guarantee fitment. RVs and specialty vehicles built on Ford E-Series chassis may use different wheel configurations depending on chassis specification and completed vehicle configuration.
The exact material, finish, quantity of individual pieces included in the set, retention system, mounting method, simulator depth, center opening dimensions, valve-stem access, and included hardware should be confirmed for this specific set rather than assumed.
Marketing Callout
THE RIGHT LOOK STARTS WITH THE RIGHT WHEEL FIT.
Designed for compatible 2008–current Ford E-350/E-450 16" x 6" front wheels, with an 8-on-6.5" bolt pattern and distinctive 4-hand-hole configuration.
